RODUTS DESCRION

Roducts Features

◆  High adaptability 

◆  high brightness

◆  High uniformity 

◆  Clear spot boundary

◆  Approximate point light source

Heat dissipation requirements:

◆  Heat dissipation system only need to works on the cooling surface(as the picture showing）. The temperature of the cooling surface can’t higher than 60 ℃.

◆  The heat sink must stick the laser source cooling surface tightly. Can’t fill up anything between them to ensure the heat could be cooled quickly by the heat sink.

◆  If necessary,please using extra fan to cool on the heat sink, to make sure the temperature won’t rise.

◆  Heat calculating: Heat=Driving electrical power x heat enerygy rate=deriving electrical x 70%

Driver connector

According to the label in the outline dimension drawing, weld the positive and negative leads to the positive and negative pads.

Drive Mode：

Constant current to drive , the actual voltage of drive  circuit is decided by light source.Please set the Max. Output power is 4.8V, and ensure there is no higher output voltage than it, including start power and ripple moment. Considering possible power voltage, the Max. Can be higher a little.Friendly suggest to use copper wire to reduce circuit partial pressure.

Driver circuit design refer：

We could offer driver circuit design for your referring, please contact with your sales engineer.

Applications

◆  High intensity tactical flashlight